Sigma Metalytics Original PMV

The Original PMV Verifier allows you to analyze the electrical properties of coins, bars, bullions, and other metal objects. Testing is fast, simple, without the use of chemicals or without mechanical damage.

  • Quick and easy to use, result in less than a second!
  • Detects and prevents precious metal fraud
  • Can be used with any metal
  • Testing without chemicals or damaging the sample
  • Reads the metal bulk—not coatings and plating
  • Testing through plastic cases and bags
  • Possible to program for additional sample types
  • No maintenance required
  • Long battery life
  • External alloy sensor measures 4x deeper
{{model.sku}}
Original PMV + {{model.set}}
{{(model.price.discount ? model.price.discount : model.price.full) | number: 2}}
{{(model.price.discount ? model.price.discount : model.price.full) * (model.vat / 100 + 1) | number: 2}} with {{model.vat}}% VAT
{{Math.ceil(10000 * (model.price.discount ? model.price.discount : model.price.full) * (1/livePrice.btc))/10000 | number: 4}}
{{Math.ceil(10000 * (model.price.discount ? model.price.discount : model.price.full) * (model.vat / 100 + 1) * (1/livePrice.btc))/10000 | number: 4}} with {{model.vat}}% VAT
{{Math.ceil(100 * (model.price.discount ? model.price.discount : model.price.full) * (1/livePrice.gold))/100 | number: 2}} oz
{{Math.ceil(100 * (model.price.discount ? model.price.discount : model.price.full) * (model.vat / 100 + 1) * (1/livePrice.gold))/100 | number: 2}} oz with {{model.vat}}% VAT
Requires at least 30 confirmations
Only 999/1000 gold is accepted

The verifier can analyze the sample in less than a second without damaging the tested coin or bar

No chemicals are used during the analysis, no mechanical damage occurs, and testing is possible through plastic cases and numismatic packages. Electromagnetic waves penetrate deep into the sample material, and the plating, surface features or coating have minimal impact on the measurement.

PMV offers several sensor sizes used depending on the size of the sample being tested. The largest sensor is built into the device and is ideal for larger objects like 1 oz coins and bars. Wands are used to measure smaller objects. The large wand is ideal for coins weighing between 1/4 and 1 oz. A small wand serves for smaller samples, such as 1-gram bars, CombiBars, 1/10 oz coins, and so on.

The new bullion sensor can penetrate the deepest and can analyze gold and silver objects up to a depth of 2 to 4 mm. It is suitable for fast testing of bars and bullions from all sides of the sample.

Use of the device is very easy. The user selects the metal from which he expects the sample to be made of. The verifier sets the value of the metal resistance to the center of the screen. Brackets on the screen are showing the expected measurement range of the selected metal. After the sample is placed on the sensor, the measurement result is displayed on the screen. If the reading matches the expected range, the value will be inside the brackets. Virtually every other metal of similar weight will be far out of that range. If the reading does not match the expected value, an arrow will appear on the screen.

Many standard metals have already been stored in the internal database of the PMV. For example, for gold coins it is possible to choose pure gold, 22K gold, 90% gold or American Gold, silver, pure silver, coin silver, 90% silver and Britannia silver. Pure platinum, palladium, rhodium and copper also have stored values. Every precious metal and alloy has a unique measurement. Even small changes in an alloy make a big difference in measured values. You can add custom metals and alloys via your computer.

Dimensions 23.5 × 13.0 × 3.5 cm
Weight 355 g
Measuring range of samples 1 - 5000 g
SensorMin. Sample ThicknessMin. Sample Diameter
Built-in sensor 1 mm 24 mm
Small Wand 1 mm 8 mm
Large Wand 1 mm 18 mm
Bullion Wand 4 mm 24 mm

Package

  • Original PMV
  • USB charger
  • bag
  • User Guide

Original PMV

Frequently Asked Questions

How does the PMV work?

The Verifier works by analyzing the resistivity of the metal sample. Resistivity of various metals is very different and even small variations in alloying results in different resistivity. Conductivity value for base metals are well known and can be found on Wikipedia and other web sites.

How do I use PMV?

PMV usage is very simple. Power unit on, wait for calibration to finish, select metal you would like to test and place the sample on sensor or place external wand over the sample. Resistivity reading takes just seconds. Each unit comes with User Guide and there are several videos available with instructions.

How do I know which sensor to use?

The small wands are for reading very thin and small samples, for example 1/10 oz coins, 1 gram bars, and CombiBars. Some slabs have high walls which make it difficult for the main sensor to reach far enough to get a reading. The large wand can sit on the flat part of the slab and often measure coins that the main sensor cannot. The large wand is also useful for rapidly reading coins in albums or cases without removing the coins. Accurate measurement requires that the sample must completely cover the sensor. The higher the resistivity of the metal, the deeper the signal penetrates.

How and when is the unit calibrated?

The unit is calibrated whenever the metal is changed, when the unit is turned on, if the sensor is changed, or on command by the user. Usually recalibration is unnecessary. However, if odd readings are obtained (typically coins that are thought to be good are reading out of range), one thing the user should do is recalibrate to make sure the instrument is giving correct readings.

Does it need maintenance or consumables?

No. PMV does calibration internally, and has nothing that is consumed. All you need is to charge the battery.

Can the wrong metal give an answer that looks right?

It is almost impossible to duplicate another coin's resistivity, weight, and size. For example, silver is the most conductive metal known, so it is virtually impossible to duplicate. Gold is the third most conductive metal (only copper is between them). Platinum and Palladium have almost identical conductivities but are easy to distinguish in other ways.
In principle it would be possible for an alloy to be developed that would mimic, for example, American Eagle gold. But combined with the appearance and weight of the coin, the fake would be obvious. A coin that has about the right weight (for example using tungsten to fake gold) would have a totally different resistivity than gold.

Can the right metal give an answer that looks wrong?

The results of the Verifier measurement are affected by the coin temperature, the coin stamping relief, and by the coin alloy. Temperature is compensated for in the instrument and is a fairly small effect, so except under very unusual circumstances will not be a factor. Only when the sample has been left in a hot car or out in the cold will it typically come into play. Generally, a hot coin (hotter than the instrument) will read to the right a little bit, and a cold sample will read a bit to the left.
Coin stamping relief is easy to see on the coin. The PMV already assumes a typical stamping relief and the effect is typically small. However, some medallions and molded coins have extreme relief and will read a little bit to the right. This is not typically seen in conventional coins because the relief is too small. On bars, areas that have heavy embossing or bubbles and flaws will sometimes read slightly to the right. Usually reading the opposite side or in another location will remedy this effect.

Can the PMV be used with jewelry?

The PMV does not work well with jewelry for two reasons. First, we need to know the specific alloy we are measuring and then determine is the item being tested falls into the range of that alloy. Jewelry alloys vary considerably. Each different combination would have its own range. The number of variations is too great to be included in default database. The second problem is that we need a flat area of metal that can be completely covered by the sensor. Jewelry is often curved, woven, and/or ornate in a fashion that makes it so we cannot get an accurate reading on it. Also, necklaces, rings, and earrings are usually too small for even our small sensor to get an accurate reading. We have some success looking at sterling silver flatware and it often matches up with the sterling silver range on the PMV, but there are also pieces that we just cannot measure.

How do I recharge the battery?

The battery is a standard lithium-ion battery. You can use the charger and cable that come with the unit. You can also charge the unit from another mobile phone charger, the USB connector from a computer, the USB connector in your car, or the USB connection on an power outlet.

Is the PMV safe to use?

Yes, the PMV uses very low power, low energy signals and doesn't emit any dangerous radiation.

Can new types of metals be added?

Yes, with the PC program you can add new types of samples, name them, and download them into the PMV for use. Contact info@sigmametalytics.com and we will assist you with this process.

Looking for something bigger?

The PMV PRO model features more sensitive sensors and analyzes metal deeper, making it ideal for larger bullions and bars.

PMV Pro

Item has beed added to the cart

{{model.qty}}×
{{model.sku}}
Original PMV
+ {{model.set}}
Continue Checkout